1. select and level the cabinet countertops, put the equipment upright, and open the feet of the main box to make the equipment control panel easy to observe.
2. insert the power plug on the top of the handheld sensor head into the power socket on the control panel and tighten it. pay attention to positioning vacancies. milk tea shop sealing machine price
3. insert one end of the power plug into the power socket on the front panel of the main box, and plug the other end into the power socket provided by the switching power supply. please try to use single-phase three-wire switching power supply.
4. turn on the powersw. on the front panel of the main box, press the switching button on the control panel, and wait for the warmup emerald green indicator light to turn on, and the device can work.
5. press the settingbutton button and set it to a suitable value, usually in the middle of 0.5-2.0 seconds.
6. put the sensor head on the lid of the container and press the run button on the rocker. at this time, the heating red indicator light is on, indicating that it has been heated, and the sensor head does not need to be removed. the heating red indicator light after the light is off, remove the sensor head, and wait for the preparation emerald green indicator light to turn on or the body's passive buzzer to make a short beep to remind you to start the next container sealing work.
7. inspect the sealing quality, according to the different materials, the diameter of the utensils and their productivity, appropriate refurbishment set the button to promote the sealing quality.